How should an Investor in the Textile Industry Choose a Boiler?

Let me share a story of an investor in the textile industry buying a boiler.

I am an investor. Two years ago, I was optimistic about the development prospects of the textile industry and decided to invest in building a factory. The preliminary industry analysis, industrial and commercial registration approval, and the approval of new factories cost me a lot of energy. The effort paid off, and everything was resolved in the end.

So I began to prepare for production and operation. The products that I produce are real silk products, and boilers are important industrial equipment required for the production of real silk products. Whether in textile engineering, fabric production, clothing manufacturing or other textile processes, many manufacturing processes require the use of steam or hot water produced by industrial boilers.Therefore, choosing a boiler system suitable for textile manufacturing is my next consideration.

I participated in a local textile exhibition and got acquainted with a professional boiler manufacturer -- EPCB boiler. After in-depth contact, I learned that EPCB boiler has decades of research on the textile industry and they have many local customers. This gave me a certain amount of trust in them.

In the initial stage of contact, I had a disagreement with EPCB' s project engineer, because I always wanted to buy a suitable boiler with the least amount of money. Because I don’t know much about boilers, under the same boiler model, I prefer to choose the cheaper one. So, there was an episode in the middle, and I was blinded by the low price of another boiler manufacturer. As everyone knows, the other party cut corners on the auxiliary parts of the boiler to attract me with low prices. Fortunately, the project engineer of EPCB gave me professional guidance and advice.

In the end, I chose to cooperate with EPCB and purchased two 3T steam boilers. During all the problems I raised during the period, the project engineer of the other party also gave timely solutions. Now the boiler has been running stably for more than a year, and overall, I am very satisfied.

Below, from my point of view of buying a boiler, I will write down the things I did when choosing a boiler and the problems I encountered. I hope it will be helpful to everyone.

1. Choose a boiler manufacturer with rich industry experience. He will truly choose the boiler for us based on our usage scenarios, so as to solve our industry's pain points to the greatest extent;

2. Consider how long the boiler you bought will serve you? If you plan to use this boiler to serve you for a long time, you should choose the latest technology boiler as much as possible.

3. There is no boiler that does not fail. This is also related to the later maintenance. Therefore, it is very important to choose a boiler supplier who can solve problems at any time. This will reduce your maintenance costs and minimize boiler failures. Production shutdown caused by shutdown of furnace for maintenance.

4. Pay attention to the water treatment of the boiler. If you don't have enough knowledge of the water quality, it will cause scaling inside the boiler, causing tube bursts and even more serious losses.

5. It is necessary to shop around, but don't just look at the price, consider the parameters of each component, and choose the one with good quality and the right price.Remember, the more you compare, the more time it will cost you.

6. Comprehensive consideration of various costs,the smallest part of the total boiler investment is the initial cost. Although capital expenditures and maintenance costs should be carefully analyzed, operating costs will determine the company's continued health and survival. Minimizing operating costs can save the price of a boiler in one year.

7. Look for boiler manufacturers that can solve your known and unknown problems.

Because the factory is expanding production, I need to add another boiler. Because of the previous understanding, the choice of boiler is relatively firm this time.

I still choose EPCB. Four Reasons:

1. The two boilers I purchased for the first time are extremely stable. No failure occurred.

2. After-sales service personnel always actively contact us, pay attention to the operating status of the boiler, and eliminate potential safety hazards.

3. Provide us with knowledge and technical support in the boiler and textile industry.

4. It can make me feel that they are sincerely providing solutions from the customer's point of view.

Now, the third boiler has also been sent to my factory. Because of rising prices, the freight rate this year has also increased a lot compared to two years ago. EPCB has made corresponding price adjustments, which makes me very satisfied. Because I pay attention to the boiler water quality, I also bought dozens of bags of resin this time. In short, if I ask where I can find a reliable boiler supplier for the boiler, I will answer: EPCB counts one.

EPCB, your private boiler system expert!

>>>>>More Boiler User Stories